Roof Coating Specialists | Seattle, Portland & the Pacific Northwest

Professional Roof Coatings That Extend Your Roof's Life by Decades.

Stop leaks, cut energy costs, and avoid an expensive full replacement. Our seamless fluid-applied roof coatings protect metal, flat, and low-slope roofs, backed by a 25-year renewable warranty and saving up to 50% compared to re-roofing.

25-Year Renewable Warranty
No Tear-Off Required
Save Up to 50% vs. Replacement
Since 2012 · 500,000+ Sq Ft
Get Your Free Roof Inspection

Find out if your roof qualifies for coating. Report within 48 hours.

No pressure. No obligation. Honest expert advice.

4.9★ Google Rating
500,000+ Sq Ft Coated
In Business Since 2012
Certified Applicator
Trusted by Property Owners Across the Pacific Northwest
Edward Jones Investments RE/MAX Burger King Hard Rock Cafe Burnett Company Realty ConocoPhillips Alaska
Why Apply a Roof Coating

A Smarter Alternative to
Tearing Off Your Entire Roof

A professional roof coating creates a seamless, waterproof membrane over your existing roof that stops leaks, reflects heat, and adds decades of protection without the cost and disruption of a full replacement.

No Tear-Off Needed

Applied directly over your existing roof. No demolition, no dumpsters, no tens of thousands wasted removing functional material.

Save Up to 50%

Roof coatings cost a fraction of full replacement. On large commercial roofs, that's a six-figure difference staying in your pocket.

Energy-Saving Finish

Highly reflective coating reduces heat absorption and cuts cooling costs, especially for warehouses, retail, and industrial buildings.

Minimal Disruption

Your home or business stays open during installation. No noisy demolition, no exposed interior, no operational downtime.

Coatings for Every Roof Type

Metal, Flat, and Commercial: We've Got You Covered

Our fluid-applied coating system is engineered for the Pacific Northwest climate and works across all major roof types.

Metal roof coating

Metal Roof Coatings

Seal seams, stop rust, and prevent corrosion with a seamless membrane that moves with your metal roof as it expands and contracts.

  • Stops and prevents rust and corrosion
  • Seals every seam, fastener, and flashing
  • Flexes with thermal expansion
  • Eliminates the need for a metal roof replacement
Flat roof coating

Flat & Low-Slope Roof Coatings

Eliminate ponding water issues and seal your flat roof with a monolithic waterproof barrier that reflects UV and resists standing water.

  • Solves ponding water and drainage issues
  • Creates a seamless, leak-proof membrane
  • UV-reflective for energy savings
  • Works over TPO, EPDM, PVC, and BUR
Commercial roof coating

Commercial & Industrial Coatings

Tailored coating solutions for warehouses, schools, factories, retail centres, and office buildings, installed with zero operational downtime.

  • Warehouses, factories, schools, retail
  • FM fire-rating compliant options
  • 25-year renewable warranty
  • Financing available for large projects
The Truth About Roof Coatings

Why Coat Instead of Replace?

Over 80% of roofs that appear to need full replacement are actually strong candidates for a professional coating system at a fraction of the cost.

Here's what's really happening: Most roofs fail at the seams and flashings, not the substrate. A full tear-off removes insulation and decking that is perfectly functional.

A roof coating creates a seamless, monolithic membrane over your existing roof. It's a 1/4-inch liquid membrane engineered to expand and contract with the Pacific Northwest's temperature swings, and it can be recoated and renewed indefinitely.
Completed roof coating project

Find Out If Your Roof Qualifies

Free inspection with thermal imaging. We'll tell you honestly if a coating is right for your roof. No pressure.

Book Free Inspection
Our Proven System

The 3-Step Roof Coating Process

A reliable, cost-efficient process designed to protect and extend the life of your roof, whether it's on a home, warehouse, or commercial facility.

Prepare and Repair
1

Prepare & Repair

Full inspection, cleaning, and repair of damaged areas. Thermal imaging detects hidden moisture. Every surface is prepped for maximum coating adhesion.

Coat and Seal
2

Coat & Seal

Seamless fluid-applied membrane across the entire surface. A 1/4-inch liquid coating that expands and contracts with the Pacific Northwest climate, creating a monolithic waterproof barrier.

Protect and Maintain
3

Protect & Maintain

Reflective top coat maximizes lifespan and energy efficiency. Our renewable warranty means you may never need to re-roof again.

Real Results

Roof Coatings in Action

From military installations to industrial manufacturing, these clients were quoted for full replacement. Coating saved them tens of thousands.

JBLM roof after coating
Before & After
U.S. Military Installation · Washington
Joint Base Lewis-McChord
Historic military fire station with water ingress across 13 roof levels. Coated with a 238-mil seamless polyurea/silicone membrane. Fire station remained fully operational throughout.
13
Roof Levels
6wk
Timeline
Zero
Downtime
Collins Products roof after coating
Before & After
Industrial Manufacturing · Klamath Falls, OR
Collins Products LLC
24/7 particle board facility in extreme UV conditions (300+ sunny days/year). 240-mil expandable polyurea with UV-reflective top coat. FM fire-rating compliant. Zero production downtime.
24/7
Facility Ops
Zero
Downtime
FM
Fire Rated
What Our Clients Say

4.9 Stars From Real Property Owners

★★★★★

"We are really pleased with Nik and the crew at Alaska Roof Restorations. The site area was left super clean and the crew was friendly and had great attention to detail. Nik worked with us when there was an issue with the colour, and it was resolved super fast. I highly recommend them."

Lindsay North
Verified Google Review
★★★★★

"Nik and his team are highly professional and knowledgeable in the roofing industry. We have been working with them for a couple of years now. They are honest and always prioritise the best interests of their customers. The quality of their work is excellent."

Daniel Isaac S. Pacary
Verified Google Review
★★★★★

"They did a wonderful job for us. Nik was professional, communicative and knowledgeable. They did the work on schedule and left the area clean. I highly recommend them."

Hayden Properties
Verified Google Review
Common Questions

Roof Coating FAQs

Our roof coating systems last 15-25 years depending on the roof type and conditions. The warranty is renewable, meaning you can recoat and extend protection indefinitely, so you may never need a full roof replacement.
Yes. Our seamless fluid-applied coating creates a monolithic waterproof barrier across every seam, flashing, and surface on your roof. Unlike patch repairs that address individual spots, the coating eliminates all potential leak points at once.
Yes. We treat and prime rusted areas before applying the coating. The fluid membrane seals over the metal surface, stopping further corrosion and preventing new rust from forming. Metal roof coating is one of our most common projects.
We coat metal roofs, flat and low-slope roofs, TPO, PVC, EPDM (rubber), built-up roofing, and modified bitumen. Our system works on both residential and commercial buildings. During your free inspection, we'll confirm your roof is a good candidate.
Absolutely. Roof coating installation is quiet, clean, and non-disruptive compared to a full tear-off replacement. Your home or business continues operating normally throughout. Even our JBLM fire station project completed with zero operational downtime.
Roof coatings typically cost 30-50% less than a full tear-off replacement. On a large commercial roof, that can mean saving $100,000 or more. Every roof is different, so we provide a detailed quote after your free inspection so you know exactly what to expect.
We serve Oregon, Washington, and Alaska. Our primary service areas include the Portland Metro, Salem, and Eugene in Oregon; greater Seattle and Tacoma in Washington; and Anchorage and the Kenai Peninsula in Alaska.
Ready to Protect Your Roof?

Get a Free Inspection &
Find Out How Much You Could Save

We'll inspect your roof, use thermal imaging to assess its condition, and give you a clear report with your options within 48 hours. No pressure, no obligation.

No obligation. No pressure. Serving Oregon, Washington & Alaska since 2012.